Tungsten Carbide punch with countersunk head
and stepped shaft to 5,5 mm cutting diameter to DIN 9861 standard part 2, type C similar to ISO 9181
|
Item no.: |
1130 . . . | How to order: | For Tungsten Carbide punch type C | |
| Cutting diameter d1 = 1,7 mm | ||||
| Version: | ø 0,3 to 0,99 can only be supplied with brazed head. | Shaft diameter d3 = 2,0 mm | ||
| ø 1,0 to 8,00 x 80 mm ground from solid material, | Total length l1 = 80 mm | |||
|
|
also available brazed on request. | |||
| Tungsten Carbide punch DIN 9861 | ||||
| From ø 8,1 and longer than 80 mm only available brazed. | HM 1,7 × 2 × 80 | |||
| Custom parts from solid materials on request. | Item no. 1130.17.2.080 | |||
|
|
||||
| Other lengths available on request. | ||||
| Material: | Tungsten Carbide | |||
|
d1 h6 |
Stufung |
l1 + 0,5 0 |
d2 |
d3 h6 |
l2 + 0,5 0 |
h + 0,2 0 |
r | |||
| über | bis |
Grenz- masse |
||||||||
| 0,5 | 1,4 | 0,1 | 71 | 80 | 2,2 | ± 0,05 | 1,5 | 7 | 1,11 |
0,4+0,3 0 |
| 0,5 | 1,9 | 3,0 | ± 0,1 | 2 | 1,37 | |||||
| 1,6 | 2,9 | 4,5 | 3 | 1,80 |
0,6+0,4 0 |
|||||
| 2,5 | 3,5 | 0,5 | 5,5 | 4 | 10 | |||||
| 3,5 | 4,5 | 6,5 | ± 0,2 | 5 | ||||||
| 4,5 | 5,5 | 8,0 | 6 | 2,23 |
1,0+0,5 0 |
|||||
